System
System¶
System settings include usernames and passwords for Wi-Fi and MQTT access.
-
Device Name
-
Display timeoutmin
-
Profile switching
-
Profile trigger
-
Traceback triggerSets the selected triggers when a traceback is present.
-
- Device Name: Custom name (default
BSC), also shown on the dashboard. - Display Timeout: Time before the connected display turns off automatically.
- Profile switching: P1/P2 store two sets of profile-capable parameters, e.g. summer/winter. Off uses P1; P1 or P2 permanently selects that profile; Trigger uses P1 when the selected profile trigger is inactive and P2 when active. The Profile trigger field appears only in Trigger mode. Profile-capable settings have P1/P2 fields.
- Traceback trigger: Activates selected triggers if a traceback (crash report) exists. Displayed only on T-CONNECT hardware.
Users¶
-
Enable password protection
-
Automatic logoutmin0 disables automatic logout.
- Users
- User 1
-
Username
-
Password
-
Role
- User 2
-
Username
-
Password
-
Role
-
- Enable password protection: Enables or disables web login. When disabled, the web interface and REST API are accessible without authentication.
- Automatic logout: Inactivity timeout, 0–240 minutes. 0 disables automatic logout.
- Users: Up to 2 accounts, each with a username, password and role: Admin (full access) or ReadOnly (read-only settings access). Passwords are stored as hashes, not plaintext.
Network Settings¶
-
Wi-Fi SSID
-
Wi-Fi password
-
Wi-Fi connection timeoutsTime after which a connection attempt is aborted and an access point is started.
0 disables the timeout. -
EthernetEnabling Ethernet disables Wi-Fi.
-
- Wi-Fi SSID: Network name to connect to.
- Wi-Fi password: Password for that network.
- Wi-Fi Connect Timeout: Maximum connection attempt time in seconds. If no connection is established, the BSC starts its own access point. 0 disables the timeout and retries indefinitely. After losing Wi-Fi and starting an AP, the BSC retries the original network every 5 minutes.
- Ethernet: Available only on T-CONNECT hardware with Ethernet. Enabling it disables Wi-Fi and uses LAN.
-
IP addressLeave the IP address empty to enable DHCP
-
Gateway
-
Subnet
-
DNSOptional
-
- IP address: Static IPv4 address. Leave empty to use DHCP.
- Gateway: Default gateway IPv4 address.
- Subnet: Local subnet mask, e.g.
255.255.255.0. - DNS (optional): DNS server IPv4 address. If empty, the DHCP-provided server is used.
MQTT Settings¶
- Restart the BSC to apply these settings!
-
MQTT enable
-
MQTT Device Name
-
MQTT Server IP
-
MQTT Server Port
-
Username
-
Password
-
MQTT Topic Name
-
MQTT send intervals
-
Persistent vTriggersThese vTriggers retain their state even when power is interrupted.
-
- MQTT Enable: Enables MQTT. With broker IP and port configured, the BSC sends data cyclically.
- MQTT Device Name: Unique name identifying the BSC to the broker.
- MQTT Server IP: Broker IPv4 address.
- MQTT Server Port: Broker port (default 1883, unencrypted).
- Username / Password: Broker credentials if required.
- MQTT Topic Name: Base publishing topic; individual-value subtopics are created automatically.
- MQTT send interval: 1–120 s, default 60 s. Data Devices, Group Devices, OneWire and Inverter categories are sent successively, one category per cycle. Inverter values are additionally published only every 15th inverter cycle.
- Persistent vTriggers: Select virtual triggers whose states should be restored automatically after reboot or power loss. See Virtual Triggers.
See MQTT for MQTT filtering and Home Assistant auto-discovery.
Time Server (NTP)¶
- Restart the BSC to apply these settings!
-
Server Name/IP
-
Time offseth
-
Restart Required
Restart the BSC to apply NTP settings.
- Server Name/IP: NTP server hostname or IPv4 address.
- Time offset: Local timezone offset from UTC in hours (−12 to +14, default +1 for Central Europe). The BSC synchronises over NTP and applies this offset.
If an external NTP server is unreliable, the local router can be a more stable alternative. On an AVM FritzBox, enable its time server under Home Network / Network / Network Settings. Example upstream servers: ntp1.t-online.de; 2.europe.pool.ntp.org. In the BSC, enter the router's IP address as NTP server; using a hostname instead can cause connection problems.