Skip to content

Example Configurations

Important: Read This First

These settings are based on user experience with LiFePO4 cells. They are guidance and an initial draft, not universally applicable configuration instructions.

Outdated Screenshots

Screenshots come from an older web app version and may differ from the current interface. Values can serve as guidance; current labels/options are documented under Inverter, Charging and Interfaces.

We cannot guarantee accuracy, completeness or suitability. Adapting settings to your system requires sound technical expertise. You are responsible for checking, understanding and adapting them before use. Do not copy settings without understanding the whole configuration and checking suitability. Incorrect use may damage equipment or batteries and endanger safety.

Use this information at your own risk. We accept no liability for direct or indirect damage resulting from these settings.

Configuration Examples

5× JK Inverter BMS 200 A (16S); 2× Victron MultiPlus 5000

BSC Serial Settings

Serial settings

BSC Inverter Settings

General

Serial 6 was chosen as master because the top pack in this stack had the highest temperatures. Sensor 1 was usually warmest and supplied the battery temperature sent to Venus OS.

General settings 1 General settings 2

Charging

Charge settings 1 Charge settings 2

Discharging

Discharge settings

BMS

Settings

JK settings 1 JK settings 2 JK settings 3 JK settings 4

Control

JK control

1× Seplos 10E 200 A (16S); 3× Growatt SPF5000ES

BSC Inverter Settings

General

Seplos general settings

Charging

Seplos charging

Discharging

Seplos discharging

BMS

Parameters

Seplos parameters

Switches

Seplos switches