Other Devices¶
In addition to BMS units, inverters and external shunts, the BSC supports other device classes documented here.
Eletechsup NTC Temperature Boards (NT48x Series)¶
NT48x boards are not BMS units: they measure up to 32 NTC temperature sensors and send values to the BSC via RS485 (Modbus RTU).
| Type | Channels | Single pack Board / BSC |
Multi-pack Board / BSC |
|---|---|---|---|
| NT48A08 | 8 | 1 / 1 | 1 / 1 |
| NT48B16 | 16 | 1 / 1 | 1 / 1 |
| NT48C32 | 32 | 1 / 1 | 1 / 1 |
Connection¶
- Connection: RS485 directly to a BSC serial interface. Select the device type under Settings / Interfaces / Serial; the BSC automatically sets 9600 baud.
- Protocol: Modbus RTU, function code 03, holding registers.
- Address: Set the Modbus slave address with the board's DIP switches and enter it in data-device mapping. It is used as the Modbus slave ID. The table uses board / BSC notation.
Temperature Data in the BSC¶
Each channel supplies a 16-bit temperature value with 0.1 °C resolution. The BSC stores it in the data device's extended temperature values.
Using the Temperatures¶
Extended temperatures are available for:
- Group-device extended temperatures.
- Temperature-dependent charge and discharge current control.
- REST, MQTT and Home Assistant.
See Group Devices for bitmasks and slot ordering.